The high-solids formula of Interprotect HS results in fewer coats required to reach the desired film thickness.Featuring a high-solids formula that is low-in-VOCs, InterProtect HS is a two-part epoxy that can be used above or below the waterline as a high-build primer. The high-solids formulation results in fewer coats required to reach the desired film thickness. As part of a gelcoat blister repair or prevention system, the formula incorporates Micro-Plate Technology to reduce water migration through the epoxy to the hull surface which could lead to blistering. Micro-Plates also provide corrosion protection for metals. Kit makes one gallon.Key FeaturesCreates a barrier against water intrusionProtects against corrosionMeets the most restrictive VOC regulationsCan be used as part of gelcoat blister repair prevention systemPhysical DataType: Barrier Coat PrimerFinish: Satin Available Colors: GreyComponents: 2Solids by Volume: 66%Coverage: 151sq.ft/gal.(Below waterline)Coverage: 211sq.ft/gal (Above waterline)VOC: 289 g/lApplicationApplication Method: Brush, roller, airless or conventional sprayTotal Thickness Required: Varies with applicationDry Film Thickness: 7 milsWet Film Thickness: 10 milsThinner: Brush: Y2333N (Model 198606); Spray: Y2316N (Model 198598)Drying Times* (Hours) Drying @41F @59F @77F @95F To touch 7 hr. 4 hr. 3 hr. 1.75 hr. To recoat 7 hr. 5 hr. 3 hr. 2 hr. To launch 16 hr. 8 hr. 6